Back to all

Fuel Injection Basics for Poplar Bluff

April 3, 2022



All modern Poplar Bluff vehicles come with fuel injection systems, so it's a topic Poplar Bluff drivers need to know something about. The mighty fuel injector is a valve that delivers the gas or diesel fuel to the right place, in the right amount at the right timeto be mixed with air and burned in the engine.

So how many fuel injectors does your vehicle have? There's one for each cylinder. So four, six or eight for most folks in Poplar Bluff, Missouri. Some vehicles have 10 or 12 cylinders. The engine control computer makes adjustments to the fuel injector as it monitors the engine and other sensors. Fuel injectors are a pretty high-tech.

Charlie's Fast Lube Poplar Bluff can help Poplar Bluff drivers with a fuel injector cleaning service. What's the benefit? In order to work right, the fuel injectors have to deliver the fuel at a precise pressure at a very precise time. It's important that the fuel is sprayed in a particular pattern as determined by the engine design.

Over time, varnish can start to build up in the fuel injectors, effecting the pressure, pattern and timing of the fuel charge. The result is that the fuel doesn't get burned as efficiently as it could. That robs performance and hurts fuel economy.

What about dirty fuel? How does that affect the fuel injectors? The fuel injectors are the last stop in the fuel system. It starts at the fuel tank. Frankly, the best way to keep your fuel injectors working well is to use high quality fuel. It's tempting to shop for bargains in Poplar Bluff with fuel prices as high as they are, but major brands in the Poplar Bluff, Missouri, area have better detergents and additives and deliver consistent quality.

What about a good fuel filter? The fuel filter is component of the fuel system. Its job is to filter out the dirt and rust that collect in the fuel tank. If it's clogged up, the dirt will bypass the filter and head upstream to the fuel injectors.

It's important to replace the fuel filter when your manufacturer recommends it. That's part of a comprehensive fuel system cleaning.

There are different kinds of fuel injection systems. Port fuel injection systems, the kind most gasoline engines have, operate at 60 pounds per square inch. The injectors for the new gas direct injection engines Poplar Bluff drivers are starting to see require 10 to 30 times as much pressure. And some diesel engines for passenger vehicles have injectors that operate at 30,000 pounds or more per square inch. There's no room for dirt and gum in a precision part like that.

There are a lot of good products available in Poplar Bluff, Missouri, that can clean fuel injectors. They're best used to prevent fouling in the fuel injectors. Many can't clean a seriously gummed up injector – that requires a professional deep cleaning, like those we offer at Charlie's Fast Lube Poplar Bluff in Poplar Bluff. But putting the cleaner in the fuel tank after you've had Charlie's Fast Lube Poplar Bluff take a look at your fuel system will help keep it clean. Be sure to read the label for directions.

Give us a call if you think your vehicle may be ready for a fuel injector cleaning.

 

Charlie's Fast Lube Poplar Bluff
2020 N. Westwood Blvd
Poplar Bluff, Missouri 63901
573-686-5585
http://www.charliesfastlubepoplarbluff.com

 

Need Service?

Request a Quote

More articles from Charlie's Fast Lube Poplar Bluff

Why did my vehicle fail its emissions test?

November 17, 2024

We all want to breathe clean air and keep our planet green. One of the ways to do that is by requiring all vehicles with internal combustion engines to pass an emissions test. Thats because these vehicles can be big polluters. Everyone wants their car to pass the test so they can continue the... More

Oh, Stop! (Disc Brake Service)

November 10, 2024

Every time you drive your vehicle, you wear down your brakes just a little bit. And after a while, that adds up. Gradually, your stopping power isn't like it used to be. Since brakes are one of your vehicle's most important safety features, it just makes sense to keep them performing well. Mos... More

Something to Latch On To (Hood Latch Safety)

November 3, 2024

The other day, a driver was trying to open his vehicle's hood so he could add some windshield washer fluid. But when he pulled the hood release inside the car, nothing happened. Usually, opening any hood is a 2-step process. You pull the hood release (which is usually a handle under the dashbo... More